Juniper PTX10001-36MR - View Power Statistics

grounding the chassis.) The cable lugs are dual hole and sized to t 1/4-20 UNC terminal studs at 15.86-
mm (0.625-in.) center line.
Figure 18: DC Power Cable Lugs
CAUTION: Before you begin to install the PTX10001-36MR, a licensed electrician must
aach a cable lug to the power cables that you supply. A cable with an incorrectly
aached lug can damage the PTX10001-36MR.
View Power Stascs
You can get addional informaon about the status of the power modules using the show chassis power
command and show chassis power detail command. Here are some examples of the CLI output:
44