Juniper PTX10001-36MR - How to Pack a PTX10001-36 MR for Shipping; How to Pack PTX10001-36 MR Components for Shipping

• ESD grounding strap
• Anstac bag, one for each component
• If you are returning the chassis, an appropriate screwdriver for the mounng screws used on your
rack or cabinet
How to Pack a PTX10001-36MR for Shipping
Here’s how to pack a PTX10001-36MR for shipping:
1. Power o the PTX10001-36MR and remove the AC power cords or DC power cables. See "Power
O the PTX10001-36MR" on page 100.
2. Remove the cables that connect the PTX10001-36MR to all external devices. See "Disconnect a
Fiber-Opc Cable from the PTX10001-36MR" on page 122.
3. Remove all eld-replaceable units (FRUs) from the router. See:
• "Remove a Fan Module from the PTX10001-36MR" on page 105
• "Remove the AC/HVDC Power Supply from the PTX10001-36MR" on page 108
• "Remove the DC Power Supply from the PTX10001-36MR" on page 111
4. Remove the PTX10001-36MR from the rack or cabinet. See "Uninstall the PTX10001-36MR" on
page 125.
5. Place the PTX10001-36MR in an anstac bag.
6. Place the PTX10001-36MR in the shipping carton.
7. Place the packing foam on top of and around the PTX10001-36MR.
8. If you are returning accessories or FRUs with the PTX10001-36MR, pack them as instructed in
"How to Pack PTX10001-36MR Components for Shipping" on page 144.
9. Close the top of the cardboard shipping box and seal it with packing tape.
10. Write the return materials authorizaon (RMA) number on the exterior of the box to ensure proper
tracking. See "Contact Customer Support to Obtain a Return Material Authorizaon" on page 142
for instrucons on obtaining an RMA number.
How to Pack PTX10001-36MR Components for Shipping
CAUTION: Do not stack PTX10001-36MR components. Return individual components
in separate boxes if they do not t together on one level in the shipping box.
Here’s how to pack a PTX10001-36MR component for shipping:
1. Place individual FRUs in anstac bags.
144