Juniper PTX10001-36MR - PTX10001-36 MR DC Power Supply Description

PTX10001-36MR DC Power Supply Descripon
IN THIS SECTION
PTX10001-36MR DC Power Supply LED | 39
PTX10001-36MR DC Input Current Selector (DIP Switch) | 40
PTX10001-36MR Input DC Voltage Specicaon | 41
60-A Input Feed Power Management | 42
PTX10001-36MR DC Power Cables | 42
PTX10001-36MR DC Power Lugs | 43
View Power Stascs | 44
The PTX10001-36MR DC power supplies are hot-removable and hot-insertable FRUs. Each 3000-W
power supply module has a single DC input and provides 12-VDC output with a standby voltage of 12-
VDC.
Figure 16 on page 38 shows the DC power supply module components.
CAUTION: Do not mix AC/HVDC and DC power supplies in the same chassis.
Figure 16: PTX10001-36MR DC Power Supply
1—
Ejector lever
4—
Handle
38