Juniper PTX10001-36MR - PTX10001-36 MR Site Guidelines and Requirements

Table 21: Site Preparaon Checklist (Connued)
Item or Task For More Informaon Performed by Date
Cables
Acquire cables and connectors:
• Determine the number of cables needed
based on your planned conguraon.
• Review the maximum distance allowed
for each cable. Choose the length of
cable based on the distance between the
hardware components being connected.
• "Determine Transceiver Support for
the PTX10001-36MR" on page 58
• "Cable and Connector Specicaons
for MX and PTX Series Devices" on
page 59
Plan the cable roung and management.
RELATED DOCUMENTATION
PTX10001-36MR Installaon Safety Guidelines | 77
Installaon Instrucons Warning | 153
Chassis and Component Liing Guidelines | 154
Restricted Access Warning | 154
Ramp Warning | 156
Rack-Mounng and Cabinet-Mounng Warnings | 156
Grounded Equipment Warning | 160
PTX10001-36MR Site Guidelines and Requirements
IN THIS SECTION
PTX10001-36MR Environmental Requirements and Specicaons | 49
48