Juniper PTX10001-36MR - Page 37

PTX10001-36MR AC Power Supply LED
Each PTX10001-36MR AC/HVDC power supply module has a status LED on the power supply module
faceplate. Refer to Figure 15 on page 28.
Figure 15: PTX10001-36MR AC/HVDC Power Supply Status LED Locaon
1—
Power supply LED
The PTX10001-36MR AC/HVDC power supply module uses an amber and green bicolor LED to
indicate the operang state (see Table 11 on page 28).
Table 11: PTX10001-36MR AC/HVDC Power Supply Status LED
Descripon
LED Color LED State Descripon
Unlit o One or both power supplies do not have
AC power.
Green On steadily The power supply module is on and
operang properly.
Blinking There is no input power, but the power
supply module from another slot in the
same system is on with 12 VSB acve.
28