Juniper PTX10001-36MR - Page 5

Mount the PTX10001-36MR in a Rack or Cabinet | 80
Before You Begin Rack Installaon | 80
Mount the PTX10001-36MR on Four Posts in a Rack | 81
Mount the PTX10001-36MR on Two Posts in a Rack | 83
Connect the PTX10001-36MR to Power | 85
Connect the PTX10001-36MR to Ground | 86
Connect AC/HVDC Power to the PTX10001-36MR | 88
Connect DC Power to the PTX10001-36MR | 90
Connect the PTX10001-36MR to External Devices | 95
Connect the PTX10001-36MR to a Management Ethernet Device | 95
Connect the PTX10001-36MR to a Management Console | 96
Register Products—Mandatory to Validate SLAs | 97
Perform the Inial Soware Conguraon for the PTX10001-36MR | 98
Power O the PTX10001-36MR | 100
Power O the AC-Powered PTX10001-36MR | 101
Power O the DC-Powered PTX10001-36MR | 102
4
Remove, Install, and Maintain Components
Maintain the PTX10001-36MR Fan Modules | 105
Remove a Fan Module from the PTX10001-36MR | 105
Install a Fan Module in the PTX10001-36MR | 106
Maintain the PTX10001-36MR Power Supplies | 108
Remove the AC/HVDC Power Supply from the PTX10001-36MR | 108
Install the AC/HVDC Power Supply in the PTX10001-36MR | 110
Remove the DC Power Supply from the PTX10001-36MR | 111
Install the DC Power Supply in the PTX10001-36MR | 113
Maintain the PTX10001-36MR Transceivers and Fiber-Opc Cables | 114
Remove a QSFP28 or QSFP56-DD Transceiver | 115
v