Juniper SRX300 Series Reference Guide

•
The maximum number of clients that can connect to the VAP
The value can be in the range of 1 through 127.
•
Security for the access point
The access point supports several types of authentication methods that are used by clients to connect
to the access point. Each of these methods and their associated parameters are configurable on a per-VAP
basis. By default, no security is in place on the access point, and therefore any wireless client can associate
with it and access your LAN. You configure secure wireless client access for each VAP.
•
None—The data transferred between clients and the access point is not encrypted. This method allows
clients to associate with the access point without any authentication.
•
Wi-Fi Protected Access (WPA) Enterprise—A Wi-Fi Alliance standard that uses RADIUS server
authentication with AES-CCMP cipher suite. This mode allows the use of high security encryption
along with centrally managed user authentication. Only the WPA2 standard is supported.
•
Wi-Fi Protected Access (WPA) Personal—A Wi-Fi Alliance standard that uses preshared key (PSK)
authentication with AES-CCMP cipher suite. Only the WPA2 standard is supported.
116

Juniper SRX300 Series Specifications

General

Memory	4 GB
CPU	Intel Atom
Storage	8 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% noncondensing