Juniper SRX300 Series - Contacting Customer Support and Returning Components; Contacting Customer Support

Part Type Tag Current Available Status
version version
FPC 2
PIC 0 MWAP_FW 1 1.1.8 1.2.1 PROGRAMMING (100%)
Routing Engine 0 RE BIOS 0 3.0 3.6 OK
Routing Engine 0 RE BIOS Backup 1 3.0 3.6 OK
user@host > show system firmware
Part Type Tag Current Available Status
version version
FPC 2
PIC 0 MWAP_FW 1 1.1.8 1.2.1 UPGRADED
SUCCESSFULLY
Routing Engine 0 RE BIOS 0 3.0 3.6 OK
Routing Engine 0 RE BIOS Backup 1 3.0 3.6 OK
user@host > show system firmware
Part Type Tag Current Available Status
version version
FPC 2
PIC 0 MWAP_FW 1 1.2.1 1.2.1 OK
Routing Engine 0 RE BIOS 0 3.0 3.6 OK
Routing Engine 0 RE BIOS Backup 1 3.0 3.6 OK
The device reboots after the firmware is upgraded. Note that if you issue the show system firmware
command after the reboot, the Current Version field shows the latest firmware version and the Available
Version field shows zero(0).
125