Kärcher MIC 50 - Regeneration <Stage 1; Regeneration <Stage 2; Regeneration <Stage 3; Regeneration <Stage 4

92 English
13.3 Regeneration <Stage 1>
Stage 1: Press <x> to start automatic regeneration.
13.4 Regeneration <Stage 2>
Stage 2: Automatic regeneration is now still possible or
starting a <Parked Regeneration>. Press <x>.
Note
The regeneration process <Parked Regeneration> is de-
scribed in a later chapter.
13.5 Regeneration <Stage 3>
ATTENTION
By now at the latest, the regeneration process has to be
started.
Stage 3: Only a <Parked Regeneration> is possible now.
The vehicle can only drive at a limited speed.
Note
The regeneration process <Parked Regeneration> is de-
scribed in a later chapter.
13.6 Regeneration <Stage 4>
ATTENTION
Regeneration must be carried out by Kärcher-Service or
by an authorised Kubota workshop.
Stage 4: The vehicle can only drive at a limited speed.
IMPORTANT: Drive the vehicle to the next safe place and
park it.
13.7 Regeneration <Stage 5>
ATTENTION
Regeneration is no longer possible. The diesel particulate
filter must be exchanged and the control program needs a
restart. This is only possible through Kärcher Service or
through an authorised Kubota workshop.
If the amount of soot particles in the diesel partic-
ulate filter necessitating regeneration is reached,
then this will be shown together with the text mes-
sage in the display.
If automatic mode is disabled, or the control elec-
tronics cannot start the regeneration process, the
display will flash and text messages will appear.