KEB F6 - Page 200

Parameter Descriptions
200
© 2024 KEB America, Inc.
Description
Value
STO Warning Triggered
521
Fail Safe Warning Triggered
522
brOH Warning Triggered
523
OL Warning Cleared
524
OL2 Warning Cleared
525
OH Warning Cleared
526
OHI Warning Cleared
527
dOH Warning Cleared
528
OH2 Warning Cleared
529
Watchdog Warning Cleared
530
Heartbeat Warning Cleared
531
ProgErr Warning Cleared
532
OS Warning Cleared
533
MaxAccDec Warning Cleared
534
SwSwitch Warning Cleared
535
SpeedDiff Warning Cleared
536
AnIn Warning Cleared
537
ENC-A Warning Cleared
538
ENC-B Warning Cleared
539
Uph Warning Cleared
540
Limit Switch Warning Cleared
541
Blockage Warning Cleared
542
Suppressed UP Warning Cleared
543
Suppressed PU Ready Warning Cleared
544
STO Warning Cleared
545
Fail Safe Warning Cleared
546
brOH Warning Cleared
547
ERROR overcurrent PU
1003
ERROR overcurrent analog
1004
ERROR overpotential
1005
ERROR underpotential
1006
ERROR overload
1007
reset E. overload
1008
ERROR overload 2
1009
ERROR overheat powmod.
1010
reset E. overheat pmod.
1011
ERROR overheat internal
1012
reset E. overheat intern
1013
ERROR motorprotection
1014
reset E. motorprotection
1015
ERROR drive overheat
1016
reset E. drive overheat
1017
ERROR overspeed
1018
reserved
1019
ERROR drive data
1020
Description
Value
ERROR motordata not stored
1021
ERROR ident
1022
ERROR diff speed
1023
ERROR fieldbus memory
1024
reserved
1025-1026
WARNING overload
1027
reset W. overload
1028
WARNING overload 2
1029
WARNING overheat powmod.
1030
reset W. overheat pmod.
1031
WARNING overheat intern.
1032
reset W. overheat intern
1033
WARNING motorprotection
1034
reset W. motorprotection
1035
WARNING drive overheat
1036
reset W. drive overheat
1037
ERROR memory size
1038
reserved
1039
ERROR FPGA conf.
1040
ERROR safety mod. SACB comm.
1041
ERROR power unit SACB comm.
1042
ERROR enc.intf. SACB comm.
1043
ERROR invalid power unit data
1044
ERROR power unit reset
1045
ERROR power unit Vref
1046
ERROR power unit flash
1047
ERROR power unit prog.
1048
reserved
1049-1051
ERROR undervoltage phase
1052
reserved
1053-1054
ERROR safety module
1055
ERROR software switch left
1056
ERROR software switch right
1057
ERROR fieldbus watchdog
1058
ERROR prg. input
1059
ERROR safety mod. type changed
1060
ERROR safety mod. changed
1061
ERROR power unit changed
1062
ERROR enc. intf. changed
1063
ERROR power unit type changed
1064
ERROR enc. intf. version
1065
ERROR overcurrent PU
1066
ERROR max acc/dec
1067
ERROR overcurrent Brake
1068
reserved
1069-1082