8. FRONT WHEEL, FRONT BRAKE，SUSPENSION，STEERING
8-14
Separate left & righ
t master cylinders from
handlebar
Remove:
-- handlebar cover (→ 2-3)
--4 fixing bolts
--Handlebar
Installa
tion
Reverse the removal procedure for installation
Tightening Torque: 20-30N.m (2.0-3.0kgf.m)
Note
Main cable,
throttle cable, brake hose, cable
wiring should be routed properly
Installation of Throttle Cable
Remove:
--3 screws
--Right handlebar top cover
Install:
--Throttle cable
--Right handlebar switch top cover
To Next Page
Loading...