13. Lighting, Instruments, Sw
itches
13-8
Removal and Instal
lation
Rem
ove connector of horn.
Rem
ove fixing bolt and horn.
Reverse the
removal procedure for installation.
Meter
Run the vehic
le at low speed and check if the speed
indicator moves.
Faulty speedomete
r: →Replace
Rem
oval and Installation
Remove front cover (→2-8)
Disconnect dashboard wire connector.
Remove fixing nut and remove meter
as illustrated on the right.
Reverse the
removal procedure for installation.
Note:
Main
cables and wires shall be routed properly.
To Next Page
Loading...