8. FRONT WHEEL, FRONT BRAKE，SUSPENSION，STEERING
8-16
Installation
of Left and Right Grip
Install:
Clean off stains and grease from handlebar and
inner left and right grips.
Install left and right grips
Install guard of handle grip.
Tighten the bolt.
NOTE:
Before applying adhesive, wipe off grease or
Oil on the handlebar surface with a lacquer
thinner.
Installation of Master Cylinder
Keep the UP mark on master cylinder upward.
Install master cylinder.
Tighten the screw.
NOTE:
Main cable, throttle cable, brake hose and
wiring should be routed properly.
Install:
--Rear view mirror(→8-13)
To Next Page
Loading...