Keysight Technologies J-BERT M8020A

158 Keysight M8070A Programming Guide
5 SCPI Command Reference
[:SOURce]:JITTer:HFRequency:BUNCorrelate Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 37
Name Description under
[:STATe][?] [:SOURce]:JITTer:HFRequency:BUNCorrela
te[:STATe][?] on page 159
:AMPLitude[?] [:SOURce]:JITTer:HFRequency:BUNCorrela
te:AMPLitude[?] on page 159
:DRATe[?] [:SOURce]:JITTer:HFRequency:BUNCorrela
te:DRATe[?] on page 160
:FILTer[:SELect][?] [:SOURce]:JITTer:HFRequency:BUNCorrela
te:FILTer[:SELect][?] on page 160
:PRBSequence[:SELect][?] [:SOURce]:JITTer:HFRequency:BUNCorrela
te:PRBSequence[:SELect][?] on page 161
[:SOURce]
:JITTer
:HFRequency
:BUNCorrelate
[:STATe][?]
:AMPLitude[?]
:DRATe[?]
:FILTer
[:SELect][?]
:PRBSequence
[:SELect][?]