Keysight Technologies J-BERT M8020A - Page 245

Keysight M8070A Programming Guide 245
SCPI Command Reference 5
:INPut:CDR Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 56
Name Description under
:LORDer[?] :INPut:CDR:LORDer[?] on page 247
:CTRL[?] :INPut:CDR:CTRL[?] on page 247
[:STATe][?] :INPut:CDR[:STATe][?] on page 248
:AUTO[?] :INPut:CDR:AUTO[?] on page 248
:RELOck :INPut:CDR:RELOck on page 249
:HIGHTD[?] :INPut:CDR:HIGHTD[?] on page 249
OPTimize :INPut:CDR:OPTimize on page 249
:FIRSt:TDENsity[?] :INPut:CDR:FIRSt:TDENsity[?] on page 250
:FIRSt:LBANdwidth[?] :INPut:CDR:FIRSt:LBANdwidth[?] on page 250
:INPut
:CDR
:LORDer[?]
:CTRL[?]
[:STATe][?]
:AUTO[?]
:RELOck
:HIGHTD[?]
:
OPTimize
:FIRSt
:TDENsity[?]
:LBANdwidth[?]
:SECond
:TDENsity[?]
:LBANdwidth[?]
:PEAKing[?]