Keysight M8070A Programming Guide 253
SCPI Command Reference 5
:INPut:ALIGnment Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 57
Name Description under
:EYE[:AUTO] :INPut:ALIGnment:EYE[:AUTO] on page 254
:EYE:ACENter :INPut:ALIGnment:EYE:ACEN on page 254
:EYE:TCENter :INPut:ALIGnment:EYE:TCEN on page 255
:EYE:ABORt :INPut:ALIGnment:EYE:ABORt on page 255
:EYE:THReshold[?] :INPut:ALIGnment:EYE:THReshold[?] on
page 255
:EYE:RESult[HEIGht]? :INPut:ALIGnment:EYE:RESult[:HEIGht]? on
page 256
:EYE:RESult:WIDTh? :INPut:ALIGnment:EYE:RESult:WIDTh? on
page 256
To Next Page
Loading...
