Keysight M8190A - Page 8

Contents
8 M8190A User’s Guide
8 General Programming
8.1 Introduction 170
8.2 IVI-COM Programming 171
8.3 SCPI Programming 172
8.3.1 AgM8190Firmware.exe 172
8.4 Programming Recommendations 175
8.5 System Related Commands (SYSTem Subsystem) 176
8.5.1 :SYSTem:ERRor[:NEXT]? 176
8.5.2 :SYSTem:HELP:HEADers? 176
8.5.3 :SYSTem:LICense:EXTended:LIST? 177
8.5.4 :SYSTem:SET[?] 178
8.5.5 :SYSTem:VERSion? 179
8.5.6 :SYSTem:COMMunicate:*? 179
8.6 Common Command List 183
8.6.1 *IDN? 183
8.6.2 *CLS 183
8.6.3 *ESE 183
8.6.4 *ESR? 183
8.6.5 *OPC 183
8.6.6 *OPC? 184
8.6.7 *OPT? 184
8.6.8 *RST 184
8.6.9 *SRE[?] 184
8.6.10 *STB? 184
8.6.11 *TST? 184
8.6.12 *LRN? 185
8.6.13 *WAI? 185
8.7 Status Model 186
8.7.1 :STATus:PRESet 188
8.7.2 Status Byte Register 188
8.7.3 Questionable Data Register Command Subsystem 189
8.7.4 Operation Status Subsystem 191
8.7.5 Voltage Status Subsystem 193
8.7.6 Frequency Status Subsystem 194
8.7.7 Sequence Status Subsystem 194
8.7.8 Connection Status Subsystem 195
8.7.9 Run Status Subsystem 195
8.8 :ARM/TRIGger Subsystem 196
8.8.1 :ABORt[1|2] 196
8.8.2 :ARM[:SEQuence][:STARt][:LAYer]:DELay[1|2][?]
<delay>|MINimum|MAXimum 196
8.8.3 :ARM[:SEQuence][:STARt][:LAYer]:CDELay[1|2][?]
<coarse_delay>|MINimum|MAXimum 198
8.8.4 :ARM[:SEQuence][:STARt][:LAYer]:RNOisefloor[1|2][?]
OFF|ON|0|1 199
8.8.5 :INITiate:CONTinuous[1|2]:ENABle[?] SELF|ARMed 199