Keysight Truevolt Series User Manual

CALibration:STRing "<string>"
CALibration:STRing?
Stores a message in calibration memory. Common messages include the last calibration date, calibration
due date, or calibration department contact information. You can perform this query regardless of
whether the instrument is secured.
You must unsecure the instrument to calibrate it or to change the calibration code or security code.
Parameter Typical Return
Quotedstringupto40characters
May contain letters, numbers, spaces, and other common char-
acters.
"FOR CAL HELP, CALL JOE AT EXT
1234"
(If no string stored, returns "")
CAL:STR "FOR CAL HELP, CALL JOE AT EXT 1234"
l This string may be stored only from the remote interface, but you can read the message from the front
panel or remote interface.
l Storing a calibration message overwrites the previous message.
l This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
CALibration:TEMPerature?
Returns the temperature of the last calibration in °C.
Parameter Typical Return
(none) +2.42850208E+001
Return the calibration temperature:
CAL:TEMP?
l You can perform this query regardless of whether the instrument is secured.
l This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
CALibration:TIME?
Returns the amount of time since the last calibration in the format hh,mm,ss.sss.
Parameter Typical Return
(none) 20,15,30.000
Return the calibration time:
CAL:TIME?
l You can perform this query regardless of whether the instrument is secured.
l This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
Keysight Truevolt Series Operating and Service Guide
241
SCPI Programming Reference

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English