EasyManuals Logo

Keysight Truevolt Series User Manual

Keysight Truevolt Series
583 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #411 background imageLoading...
Page #411 background image
SYSTem:COMMunicate:LAN:IPADdress "<address>"
SYSTem:COMMunicate:LAN:IPADdress? [{CURRent|STATic}]]
Assigns a static Internet Protocol (IP) address for the instrument. If DHCP is enabled (SYSTem:COMMu-
nicate:LAN:DHCP ON), the specified static IP address is not used. Contact your LAN administrator for
details.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to activ-
ate the new setting.
Parameter Typical Return
Command: "nnn.nnn.nnn.nnn"
Query: {CURRent|STATic}. Default: CURRent.
"169.254.149.35"
Set a static IP address:
SYST:COMM:LAN:IPAD "169.254.149.35"
SYST:COMM:LAN:UPD
l SYSTem:SECurity:IMMediate sets this parameter to its default value.
l On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l For the query form, specify "CURRent" (default) to read the value currently being used by the instru-
ment. Specify "STATic" to read the value currently stored in nonvolatile memory within the instrument
(may not be the actual address used by the instrument if DHCP is enabled).
l This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instru-
ment Preset (SYSTem:PRESet).
l This parameter is set to its default value when the instrument is shipped from the factory and after
SYSTem:SECurity:IMMediate.
SYSTem:COMMunicate:LAN:MAC?
Returns the instrument's Media Access Control (MAC) address as an ASCII string of 12 hexadecimal char-
acters (0-9 and A-F) enclosed in quotation marks.
Your LAN administrator may need the MAC address to assign a static IP address for this
device.
Parameter Typical Return
(none) "0030D3001041"
Return the MAC address:
SYST:COMM:LAN:MAC?
l On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l The MAC address is also known as the link-layer address, the Ethernet (station) address, LANIC ID or
Hardware Address. This is an unchangeable 48-bit address assigned by the manufacturer to each
unique Internet device.
SCPI Programming Reference
412
Keysight Truevolt Series Operating and Service Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight Truevolt Series and is the answer not in the manual?

Keysight Truevolt Series Specifications

General IconGeneral
BrandKeysight
ModelTruevolt Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals