Keysight Truevolt Series User Manual

SYSTem:COMMunicate:LAN:WINS[{1|2}] "<address>"
SYSTem:COMMunicate:LAN:WINS[{1|2}]? [{CURRent|STATic}]
Assigns the static IP addresses of the Windows Internet Name System (WINS) servers. A primary and a sec-
ondary server address may be assigned. If DHCP is available and enabled, DHCP will auto-assign these
server addresses. These auto-assigned server addresses take precedence over the static addresses
assigned with this command. Contact your LAN administrator for details.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to activ-
ate the new setting.
Parameter Typical Return
Command: "nnn.nnn.nnn.nnn". Default: "0.0.0.0".
Query: {CURRent|STATic}. Default: CURRent.
"198.105.232.4"
Set a static primary WINS address:
SYST:COMM:LAN:WINS "198.105.232.4"
SYST:COMM:LAN:UPD
l On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l The WINS addresses are stored in nonvolatile memory. They do not change when power has been off,
after a Factory Reset (*RST) or after an Instrument Preset (SYSTem:PRESet).
l SYSTem:SECurity:IMMediate sets this parameter to its default value.
l
CURRent: returns address currently being used by the instrument.
l
STATic: returns static address from non-volatile memory. This address is used if DHCP is disabled or
unavailable.
Keysight Truevolt Series Operating and Service Guide
417
SCPI Programming Reference

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English