AKD2G-S Installation, Safety 1 | 9 īīSetup
9.2.2.5 Installation under Windows 7/8/10
The DVD includes an installation program for the setup software. The latest setup software
can be downloaded from www.kollmorgen.com.
Installation
Autostart function activated:
Insert the DVD into a free drive. A window with the start screen opens. There you find a
link to the setup software WorkBench. Click it and follow the instructions.
Autostart function deactivated:
Insert the DVD into a free drive. Click Start (task bar), then Run. Enter the program call:
x:\index.htm (x = correct DVD drive letter).
Click OK and proceed as described above.
Connection to the Ethernet interface of the PC
Connect the interface cable to an Ethernet interface on your PC or to a Switch and to the
service interface X20 of the AKD2G (ā # 98).
The LCD display shows a sign, if the connection between AKD2G and WorkBench is active.
118 Kollmorgen | kdn.kollmorgen.com | Beta, December 2018
To Next Page
Loading...
Need help?
General
