EasyManuals Logo

Kollmorgen AKD2G-S Series User Manual

Kollmorgen AKD2G-S Series
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
AKD2G-S Installation, Safety 1 | 4 Product life cycle handling
4.8 System Repair
Only professional staff who are qualified in electrical engineering are allowed to exchange
parts of the drive system.
CAUTION: Automatic Start! During replacement work a combination of hazards and mul-
tiple episodes may occur.
Work on the electrical installation may only be performed by trained and qualified per-
sonnel, in compliance with the regulations for safety at work, and only with use of pre-
scribed personal safety equipment.
Exchange of the device
Only the manufacturer can repair the device. Opening the device voids the warranty.
1. Decommission the device (see chapter 4.5 "Decommissioning").
2. Demount the device (see chapter 4.7 "Disassembly").
3. Send the device to the manufacturer.
4. Install a new device as described in this manual.
5. Setup the system as described in this manual.
Exchange of other drive system parts
If parts of the drive system (for example cables) must be replaced, proceed as follows:
1. Decommission the device (see chapter 4.5 "Decommissioning").
2. Exchange the parts.
3. Check all connections for correct fastening.
4. Setup the system as described in this manual.
4.9 Disposal
To dispose the unit properly, contact a certified electronic scrap disposal merchant.
In accordance with the WEEE-2012/19/EC guideline and similar, the manufacturer accepts
returns of old devices and accessories for professional disposal. Transport costs are the
responsibility of the sender.
Contact Kollmorgen and clarify the logistics.
Send the devices in the original packaging to the manufacturer address:
North America South America
KOLLMORGEN
201 West Rock Road
Radford, VA 24141, USA
KOLLMORGEN
Avenida Jo Paulo Ablas, 2970
Jardim da Glória, Cotia SP
CEP 06711-250, Brazil
Europe Asia
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
40880 Ratingen, Germany
KOLLMORGEN
Floor 4, Building 9, No. 518,
North Fuquan Road, Changning District,
Shanghai 200335, China
26 Kollmorgen | kdn.kollmorgen.com | Beta, December 2018

Table of Contents

Other manuals for Kollmorgen AKD2G-S Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kollmorgen AKD2G-S Series and is the answer not in the manual?

Kollmorgen AKD2G-S Series Specifications

General IconGeneral
BrandKollmorgen
ModelAKD2G-S Series
CategoryServo Drives
LanguageEnglish

Related product manuals