Faults and Warnings
The display shows the code of the fault or warning that occurred. If a fault occurs, the color of
the left section switches to red. Navigate with B1 / B2 to the Fault screen to see a short
description of the fault or warning.
See WorkBench Onlinehelp for more details.
6.7 SD Card Slot
AKD2G offer a SD card slot for
to boot the drive with data from the SD Memory
card
These features can be started from the drive display
using push-buttons B1/B2.
Supported SD card types
SD cards are formatted by the manufacturer. The following table outlines the SD card types
and AKD2G support.
SD Type File System Capacity Supported
SD (SDSC) FAT16 1MB to 2GB YES
SDHC FAT32 4GB to 32GB YES
SDXC exFAT (Microsoft) >32GB to 2TB NO
Features
Boot AKD2G with data from SD card:
Remove 24V. Apply 24V with both buttons pressed. Release buttons after the display is
updated.
AKD2G-S Installation, Safety 1 | 6 Technical description and data
Kollmorgen | kdn.kollmorgen.com | Beta, December 2018 41
To Next Page
Loading...
Need help?
General
