10.7 Safety Faults, Safety Warnings
AKD2G with safety option 1 do not have safety failure modes.
10.7.1 Drive LCD Display
The drive offers an LCD display and two push-buttons B1 / B2 for navigation.
The display on the front panel of the drive shows the code of the fault or warning that
occurred. Safety Faults and Warnings follow the same pattern and are identified by a four
digit code 90 XX, where 90 is the two digit group code, and XX is a two digit ID.
Navigate with B1 / B2 to the Fault screen to see a short description of the fault or warning.
See WorkBench Onlinehelp for details.
AKD2G-S Installation, Safety 1 | 10 îîFunctional Safety
Kollmorgen | kdn.kollmorgen.com | S101, December 2018 133
To Next Page
Loading...
Need help?
General
