Korg PA1000 User Manual

1 74 | Customizing and editing the Sound sets
Quick editing of Drum Kits
You can adjust the volume and edit the main parameters for each family of
Drum and Percussion instrument for the selected track. A list of families is
shown below.
These parameters can be accessed only on tracks set to the Drum mode
in the Track Controls > Mode page. Use them on tracks with a Drum Kit as-
signed, or you will not be able to hear any change.
Edit the Drum Kits
1 Go to the Track Controls > Drum Edit page.
2 If you like, start the Style or Song to listen to the changes during playback.
3 If you like, solo the track you are editing, to isolate it from the other tracks.
4 Use the Select buttons to select a track set to Drum mode (usually, the Drum
and Percussion tracks).
After selecting a track set in Drum mode, the parameters in the page can be
selected (otherwise, they remain dimmed).

Korg PA1000 Specifications

General

Sound Engine	EDS-X (Enhanced Definition Synthesis-eXpanded)
Polyphony	128 voices
Keyboard	61 keys with velocity and aftertouch
Display	7-inch TFT display
Song Player	MP3, SMF (Standard MIDI File), KAR
Storage	960 MB
Connectivity	USB, MIDI, Audio In/Out
Weight	10.75 kg (23.7 lbs)
Effects	148 effect types
Sounds	Over 1, 750 Factory Sounds, 107 Drum Kits
User PCM Sample Memory	600 MB
Style Tracks	8 tracks
Chord Sequencer	Yes
Pads	4 Assignable Pads
Lyrics	MID, KAR, MP3+Lyrics
Sequencer	16 tracks
SongBook	Fully programmable music database
Multi Pad	4 Assignable Pads
Connections	Audio In, Line Out
Clock	Internal
Power Supply	AC adapter