Korg PA1000

Effect parameters |747
MISC (Miscellaneous)
Stereo Decimator
This effect creates a rough sound like a cheap sampler by lowering the sam-
pling frequency and data bit length. You can also simulate noise unique to a
sampler (aliasing).
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
Pre LPF
Pre LPF
High Damp Output Level
High DampOutput Level
Sampling Frequency
Decimator
Decimator
D
-mod
LFO
Resolution
Resolution
a Pre LPF Off, On Selects whether the harmonic noise
caused by a decrease in sampling fre-
quency is generated or not
High Damp [%] 0…100 Sets the ratio of cut of the high range
b Sampling Freq [Hz] 1.00k…
48.00k
Sets the sampling frequency
Src Off…Tempo Selects the modulation source of the
sampling frequency
Amt –48.00k…
+48.00k
Sets the modulation amount of the sam-
pling frequency
c LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO
speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed