444| Customizing and editing the Sounds
Adding effects to the Sound
You can send the Sound to the effects of the FX B Group (usually reserved
to the Keyboard Sounds).
▪ Go to the Sound > Effects > FX B page.
Activating and choosing the insert effects
Each Sound can go into an insert effect processor.
Activate the insert effects
▪ Use the Insert FX > On/Off button to turn on or off the insert effect.
Choose the insert effect
1 Touch the name of the selected effect type, or the ‘x’ symbol under the On/
Off button, to open the FX Edit page.
Selected FX
FX edit parameters
2 Use the pop-up menu on top of the page to choose an effect.
3 If needed, edit the effect parameters, as described in the part of the manual
dedicated to the Effects.
To Next Page
Loading...
