Korg PA1000

876| MIDI
Synchronizing Tempo with other
instruments
Sending the MIDI Clock
The Arranger or the selected MIDI Song can send a synchronization mes-
sage to the other devices.
1 Go to the Global > MIDI > General Controls page.
2 Select the Clock Send parameter to send the internal MIDI Clock to the MIDI
IN and USB ports.
When the MIDI Clock signal is sent, you can slave another instrument to the
Pa1000 Tempo, Start/Stop and Play/Stop commands.
This parameter is automatically deactivated each time the instrument is
turned on.
Receiving the MIDI Clock
In Style Play, Sequencer or Sound mode, you can receive synchronization
messages from the internal Arranger or Player, or from an external device.
In Song Play mode, the MIDI Clock is always generated by the internal
Players. While in this mode, Pa1000 cannot receive MIDI Clock messages
from another device.