Powering up |19
Calibrating the touch screen
Calibrating the display
It may happen (for example, after loading a new operating system) that the
Color TouchView™ display has to be recalibrated, to make pointing more ac-
curate.
Warning: Do not use sharp objects, or you will damage your screen!
1 Keep the GLOBAL button pressed, until the Touch Panel Calibration page
appears.
2 First touch exactly inside the set of arrows in the upper left corner of the
display.
3 The arrows will subsequently move to the other corners of the display. Touch
exactly inside them.
4 Finally, touch Save to confirm the new calibration.
▪ In case you want to exit and cancel the calibration, press the EXIT button
before completing the procedure.
To Next Page
Loading...
