Korg PA1000

570| Effects for the Sounds, Voice, Guitar
DEL (Delay)
L/C/R Delay
This multitap delay outputs three Tap signals to the left, right, and center
respectively. You can also adjust the left and right spread of the delay sound.
C Delay
R Delay
Left
Right
Feedback
Spread
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In -Stereo Out
Input Level D-mod
High Damp
Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
a L Delay Time
[msec]
0…2730 Sets the delay time of TapL
Level 0…50 Sets the output level of TapL
b C Delay Time
[msec]
0…2730 Sets the delay time of TapC
Level 0…50 Sets the output level of TapC
c R Delay Time
[msec]
0…2730 Sets the delay time of TapR
Level 0…50 Sets the output level of TapR
d Feedback
(C Delay)
–100…+100 Sets the feedback amount of TapC
Src Off…Tempo Selects the modulation source of the TapC
feedback amount
Amt –100…+100 Sets the modulation amount of the TapC feed-
back amount
e High Damp [%] 0…100 Sets the damping amount in the high range
Low Damp [%] 0…100 Sets the damping amount in the low range
f Input Level
Dmod [%]
–100…+100 Sets the modulation amount of the input level
Src Off…Tempo Selects the modulation source for the input
level
g Spread 0…50 Sets the width of the stereo image of the effect
sound