Korg PA1000 User Manual

Editing the Sounds |421
Modulating the filters
You can modulate the filter cutoff frequency of the selected oscillator.
Modulation will add dynamic timbre variation.
Programming realtime filter modulation
▪ Go to the Sound > Filter > Modulation page.
When the filter type is Low Pass Resonance, the parameters for filter B will
not be editable (dimmed).
Tracking the cutoff frequency across the keyboard
Keyboard Tracking changes the timbre quality across the keyboard.
▪ Use the Key Low/High parameters (C–1…G9) to change the filter cutoff fre-
quency across the keyboard for the selected oscillator.
Keyboard Tracking varies the cutoff frequency according to the position of
the key on the keyboard. How the cutoff frequency is affected by the key-
board location can be specified by the Key Low, Key High, Ramp Low, Ramp
High, and the Intensity to A/B parameters.
Keyboard tracking will apply to the range below the specified Low note num-
ber, and above the specified High note number.

Korg PA1000 Specifications

General

Sound Engine	EDS-X (Enhanced Definition Synthesis-eXpanded)
Polyphony	128 voices
Keyboard	61 keys with velocity and aftertouch
Display	7-inch TFT display
Song Player	MP3, SMF (Standard MIDI File), KAR
Storage	960 MB
Connectivity	USB, MIDI, Audio In/Out
Weight	10.75 kg (23.7 lbs)
Effects	148 effect types
Sounds	Over 1, 750 Factory Sounds, 107 Drum Kits
User PCM Sample Memory	600 MB
Style Tracks	8 tracks
Chord Sequencer	Yes
Pads	4 Assignable Pads
Lyrics	MID, KAR, MP3+Lyrics
Sequencer	16 tracks
SongBook	Fully programmable music database
Multi Pad	4 Assignable Pads
Connections	Audio In, Line Out
Clock	Internal
Power Supply	AC adapter