Making new sounds with Sampling |475
Creating multisamples
After having recorded, loaded or imported all the needed samples, you can
create a multisample. The multisample is a way of organizing several sam-
ples on the keyboard. Each sample is assigned to a Keyboard Zone (or Index),
with a higher and a lower limit. Later, the multisample will be assigned to an
oscillator in an ordinary Sound.
▪ Go to the Sampling > Multisample > Edit page.
Sample
Zone index
In this page you will assign the sample(s) to a multisample. Assign each sam-
ple to a different keyboard zone.
Choosing the multisample to edit
1 Touch the name of the multisample on top of the page to open the
Multisample Select window.
2 Touch the name of a multisample to select it.
To Next Page
Loading...
