546| Audio In/Out, Voice and Guitar Processor
Writing a Voice/Guitar Preset
Voice/Guitar Presets can store the Voice/Guitar effects settings for instant
recall. The library is where you organize them by type.
Note: Changes can normally only be saved onto User Voice/Guitar Presets. They can-
not be saved onto Factory Voice/Guitar Presets.
Writing a Voice/Guitar Preset
Open the Write Voice/Guitar Preset dialog
▪ While in the Voice/Guitar Preset > FX page, choose the Write Voice/Guitar
Preset command from the page menu.
Voice/Guitar Preset name
Voice/Guitar
Preset location
Touch to open the
Select window
Write over the same Voice/Guitar Preset
▪ If you want to overwrite the current Voice/Guitar Preset, just touch the OK
button.
Write to a different Voice/Guitar Preset location
1 If you want to save onto a different location, touch the Select button and
open the Voice/Guitar Preset Select window. Choose a location as if you
were choosing a Voice/Guitar Preset. Blank locations are shown as a series
of dashes (‘–––’).
2 When back at the Write Voice/Guitar Preset dialog, you may change the
name of the preset. Touch the Text Edit (
) icon to open the virtual key-
board and edit the name.
When done editing the name, confirm by touching the OK button under the
virtual keyboard.
3 When back at the Write Voice/Guitar Preset dialog, confirm the Write opera-
tion by touching the OK button.
To Next Page
Loading...
