Hand controllers |811
Programming the keyboard’s velocity and
aftertouch
Assigning functions to velocity and aftertouch
Velocity usually controls the Sound’s loudness, while aftertouch controls
modulation. However, they can be assigned to other roles by each individual
Sound. Assigning Sound parameters can be done in Sound Edit.
Assigning aftertouch to the Sounds
You can activate/deactivate aftertouch on each Keyboard Sound.
1 Go to the Keyboard/Ensemble > Aftertouch page.
2 Use the Aftertouch checkbox to turn the aftertouch on/off on each Keyboard
Sound.
3 Write the changes to a Keyboard Set.
To Next Page
Loading...
