Editing the Sounds |439
Programming the LFO
LFO (Low Frequency Oscillation) can be used to cyclically modulate the Pitch,
Filter, and Amp of each oscillator. There are two LFO units for each oscillator
(LFO 1 and LFO 2).
▪ Go to the Sound > LFO > LFO 1 or LFO 2 page, depending on the LFO to pro-
gram.
Choosing the LFO waveform and settings
You can choose the LFO waveform, program it and synchronize it.
To Next Page
Loading...
