Connecting MIDI devices |869
Connecting via the USB DEVICE port
The USB DEVICE port can be used for MIDI communication between Pa1000
and a personal computer. Use a standard A-to-B USB cable to connect your
instrument and computer. A dedicated software driver can be found in our
web site.
Installing the KORG USB MIDI Driver
KORG USB-MIDI Driver system requirements
Be sure your personal computer meets the requirements, as described in the
documents accompanying the driver.
Copyright notice
Copyright to all software included in this product is the property of KORG
Inc. The license agreement for this software is provided separately. You must
read this license agreement before you install this software. Your installation
of this software will be taken to indicate your acceptance of this agreement.
Installing the KORG USB-MIDI Driver on a Windows PC
Please connect Pa1000 to the computer via an USB cable only after having
installed the KORG USB-MIDI Driver Tools.
1 Double-click on KORG USB-MIDI Driver Tools Setup v.n.nn.exe to run the
installer (‘n.nn’ meaning the version number).
2 Follow the instructions appearing on screen. At the end, the tools will be
installed.
3 When installation is completed, connect the USB DEVICE port of your
Pa1000 to one of the USB ports of your Windows PC by using a standard
A-to-B USB cable. The Auto Installer will immediately start.
4 When finished, the USB-MIDI driver will be installed, and Pa1000 will be able
to communicate with your computer via USB.
You can access the tools and manuals from the Start menu.