8| Let’s start!
Restoring a safety copy
To restore a backup, use the Media > Utility > Resources Restore command.
If you saved your data with the Media > Save All command, use the Media >
Load operations to reload them.
Restoring the original factory data
In case you want to restore the original factory data, use the Media > Utility
> Factory Restore command.
Warning: This operation will overwrite all the Factory, Local and User data!
Loading the Operating System
Your Pa1000 can be constantly updated as new versions of the operating
system are released by KORG. You can download the most up-to-date oper-
ating system from our web site. Please, read the instructions supplied with
the operating system on the site.
You can see which version of the operating systems is installed in your
Pa1000 by going to the Media > Utility page.
Warning: Do not install an OS other than the official OS supplied by KORG for the
Pa1000. Trying to install an OS created for different models or downloaded from
unofficial web sites may cause data loss and permanent damage to the instrument.
KORG is not responsible for any damage caused by improper installation of the OS.
To Next Page
Loading...
