206| Customizing, recording and editing the Styles and Pads
As an alternative, you can adjust the levels in the Style Play or Style Record
> Mixer/Tuning > Volume/Pan page.
2 Touch the mixer channel whose volume level you want to change.
3 Keep the virtual slider held on the screen, and drag it to the desired level.
As an alternative, use the VALUE control to change the volume level of the
selected channel.
4 Keep the SHIFT button pressed, and use the TEMPO +/- buttons to propor-
tionally change the volume of all the similar parts.
Moving one of the sliders corresponding to a Style track, proportionally
changes the volume of all the Style tracks.
Style tracks Meaning
DRUM Drum part
PERC Percussion part
BASS Bass part
ACC1-5 Five separate instrumental accompaniment parts (Acc1-5). These
may freely be melodic or chordal parts
5 Return to the Main page
When done, press the TRACK SELECT button again to switch back to the
Main page and see the grouped parts.
Memorize the volume level
▪ Write the Style Settings.
Turning the individual Accompaniment Sounds on or off
Sounds can be muted, in case you don’t want to hear them in the mix. As an
example, the accompaniment might contain a piano part, and you want to
play it live on the keyboard.
Note: Changes can normally only be saved onto User or Direct Styles. They cannot
be saved onto Factory Styles.
To Next Page
Loading...
