222| Customizing, recording and editing the Styles and Pads
Starting recording with a switch
You can program an assignable switch to be the Chord Sequence Record
button. This will let you start recording immediately, without having to enter
record-pending.
1 Go to the Pads/Switches > Switch page, and assign the Chord Sequence
Record command to one of the assignable switches (#3 recommended).
2 Write the changes to the a Keyboard Set. If you want this to be the default
behaviour of the switch, write the changes to the MY SETTING Keyboard Set
(automatically selected on startup).
3 Use the programmed assignable switch to record the sequences.
To Next Page
Loading...
