Korg PA1000

Recording the Styles and Pads |253
▪ To tie the note to be inserted to the previous one, touch the Tie button. A
note will be inserted, tied to the previous one.
Insert a chord
▪ Play a chord instead of a single note. The event name will be the first note of
the chord you pressed, followed by the ‘…’ indicator.
Insert a chord made of notes with different velocity values
You can make the upper or lower note of a chord, for example, louder than
the remaining ones, to let the most important note stand out from the chord.
1 Edit the first note’s Velocity value.
2 Press the first note and keep it pressed.
3 Edit the second note’s Velocity value.
4 Press the second note and keep it pressed.
5 Edit the third note’s Velocity value.
6 Press the third note, then release all notes.
Insert a second voice
You can insert passages where one note is kept pressed, while another voice
moves freely.
A few examples:
Step Time =
Step Time =
On
Press E and C
On
Press G
Off
Off
Release G and C
Release E (continue holding C)