270| Customizing, recording and editing the Styles and Pads
RX Noise/Guitar
In the Noise/Guitar page you can set the RX Noise level and the ‘human feel’
of the Guitar tracks.
1 Go to the Style Record > Element Track Controls > Guitar/Noise page.
Selected Style Element
RX Noise
level
Guitar track
‘humanization’
You set the RX Noise and Humanize parameters for the Pad in the Pad
Record > Pad Track Controls > Settings page.
2 Press the corresponding button on the control panel to select one of the
Style Elements (VARIATION1 … ENDING3).
3 Use the RX Noise knobs to adjust the volume of RX Noises in the corre-
sponding tracks. This control applies to all types of tracks (provided the
Sound contains RX Noises).
4 Use the Humanize Guitar knobs to apply a random value to the position,
velocity and length of notes of Guitar tracks. This only works on tracks set
to the Gtr type in the Style Record > Style Track Controls > Type/Trigger/
Tension page, or the Pad Record > Pad Track Controls > Settings page.
5 Press the START/STOP button and play some chords to check how it works.
Select any Style Element using the control panel button. Press START/STOP
again to stop playback.
To Next Page
Loading...
