Korg PA1000 User Manual

434| Customizing and editing the Sounds
axis. However if the EG settings etc. have already raised the volume to its
maximum level, the volume cannot be increased further.
With negative (–) values of this parameter, the volume will decrease when
pressure is applied to the keyboard.
Modulating amplitude with the LFOs
LFO is a cyclic modulation. Applied to the amplitude it produces an effect
usually called ‘tremolo’.
▪ Go to the Sound > Amp > LFO page.
▪ Use the LFO 1/2 > Intensity parameters (-99…+99) to adjusts the effect of
the cyclic modulation that LFO 1/2 (set in the LFO > LFO 1 and LFO 2 pages)
will apply on the amp EG. Negative (–) settings will invert the phase.
Change in cutoff
Low setting High setting
▪ Use the AMS pop-up to select a modulation source for the LFO Intensity vol-
ume of the amp for the selected oscillator.
The Intensity parameter (-99…+99) specifies the depth and direction of the
AMS.

Korg PA1000 Specifications

General

Sound Engine	EDS-X (Enhanced Definition Synthesis-eXpanded)
Polyphony	128 voices
Keyboard	61 keys with velocity and aftertouch
Display	7-inch TFT display
Song Player	MP3, SMF (Standard MIDI File), KAR
Storage	960 MB
Connectivity	USB, MIDI, Audio In/Out
Weight	10.75 kg (23.7 lbs)
Effects	148 effect types
Sounds	Over 1, 750 Factory Sounds, 107 Drum Kits
User PCM Sample Memory	600 MB
Style Tracks	8 tracks
Chord Sequencer	Yes
Pads	4 Assignable Pads
Lyrics	MID, KAR, MP3+Lyrics
Sequencer	16 tracks
SongBook	Fully programmable music database
Multi Pad	4 Assignable Pads
Connections	Audio In, Line Out
Clock	Internal
Power Supply	AC adapter