Korg PA1000

Effect parameters |591
St.BPMAutoPanDly (Stereo BPM Auto Panning Delay)
This stereo auto panning delay enables you to set the delay time to match
the song tempo.
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
Delay
Delay
High Damp Low Damp
High Damp
Low Damp
Feedback
a BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individual
effect
Time Over? L ---, OVER! Display the error message if the left chan-
nel delay time exceeds the upper limit
R ---, OVER! Display the error message if the right chan-
nel delay time exceeds the upper limit
b L Delay Base Note
…
Selects the type of notes to specify the left
channel delay time
Times x1…x32 Sets the number of notes to specify the left
channel delay time
Feedback –100…+100 Sets the feedback amount for the left chan-
nel
c R Delay Base Note
…
Selects the type of notes to specify the
right channel delay time
Times x1…x32 Sets the number of notes to specify the
right channel delay time
Feedback –100…+100 Sets the feedback amount for the right
channel
d High Damp [%] 0…100 Sets the damping amount in the high range
Low Damp [%] 0…100 Sets the damping amount in the low range
e LFO Waveform Triangle, Sine Selects the LFO Waveform
Shape –100…+100 Changes the curvature of the LFO
Waveform
LFO Phase –180…+180 Sets the LFO phase difference between the
left and right