Korg PA1000

Effect parameters |627
Phaser - Cho/Flng (Phaser - Chorus/Flanger)
This effect combines a mono phaser and a chorus/flanger.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
+
Chorus/Flanger
Cho/Flng
FX Amt
LEQ
HEQ
EQ
Trim
Chorus/Flanger
Feedback
Phaser
Phaser
FX Amt
Phaser
Resonance
LFO: Tri / Sine
LFO: Tri / Sine
Normal
Wet Invert
Output Mode
–
+
PHASER
a [P]LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
LFO Waveform Triangle, Sine Selects the LFO Waveform
b [P]Manual 0…100 Sets the frequency to which the ef-
fect is applied
Depth 0…100 Sets the depth of LFO modulation
Resonance –100…+100 Sets the resonance amount
c [P]Phaser Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Sets the phaser effect balance
CHORUS/FLANGER
d [F]LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
LFO Waveform Triangle, Sine Selects the LFO Waveform
e [F]Delay Time [msec] 0.0…1350.0 Sets the delay time
Depth 0…100 Sets the depth of LFO modulation
Feedback –100…+100 Sets the feedback amount
f [F]EQ Trim 0…100 Sets the EQ input level
g [F]PreLEQ Gain [dB] –15…+15 Sets the gain of Low EQ
PreHEQ Gain [dB] –15…+15 Sets the gain of High EQ
h [F]Cho/Flng Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Sets the effect balance of the cho-
rus/flanger
Src Off…Tempo Selects the Wet/Dry modulation
source for the chorus/flanger
Amt –100…+100 Sets the Wet/Dry modulation
amount for the chorus/flanger