Korg PA1000 - Page 721

Effect parameters |709
P4EQ - Wah (Parametric 4-Band EQ – Wah/Auto Wah)
This effect combines a mono four-band parametric equalizer and a wah. You
can change the order of the connection.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
Trim
+
Parametric 4Band EQ
Routing
Wah/Auto Wah
D
-mod
Envelope
Sweep Mode
D-mod
Auto
LFO
LFO
Wah
P4EQ
a [E]Trim 0…100 Sets the parametric EQ input level
Routing P4EQ › Wah,
Wah › P4EQ
Changes the order of the parametric
equalizer and wah connection
b [E]B1 Cutoff [Hz] 20…1.00k Sets the center frequency of Band 1
Q 0.5…10.0 Sets the bandwidth of Band 1
Gain [dB] –18…+18 Sets the gain of Band 1
c [E]B2 Cutoff [Hz] 50…5.00k Sets the center frequency of Band 2
Q 0.5…10.0 Sets the bandwidth of Band 2
Gain [dB] –18…+18 Sets the gain of Band 2
d [E]B3 Cutoff [Hz] 300…10.00k Sets the center frequency of Band 3
Q 0.5…10.0 Sets the bandwidth of Band 3
Gain [dB] –18…+18 Sets the gain of Band 3
e [E]B4 Cutoff [Hz] 500…20.00k Sets the center frequency of Band 4
Q 0.5…10.0 Sets the bandwidth of Band 4
Gain [dB] –18…+18 Sets the gain of Band 4
WAH
f [W]Frequency Bottom 0…100 Sets the lower limit of the wah center
frequency
Frequency Top 0…100 Sets the upper limit of the wah center
frequency