Effect parameters |713
c: Envelope Shape
This parameter determines the sweep curve for auto-wah.
Level
Envelope
value = 0...–100
value = 0...+100
d: LFO Frequency [Hz]
e: MIDI Sync
When “MIDI/Tempo Sync”=Off, the LFO speed uses the LFO Frequency pa-
rameter setting. When “MIDI/Tempo Sync”=On, the LFO speed follows the
“BPM”, “Base Note”, and “Times” settings.
e: BPM
e: Base Note
e: Times
One cycle of LFO sweep is obtained by multiplying the length of a note ( r … w )
(selected for “Base Note”, in relation to the tempo specified in “BPM”, or the
MIDI Clock tempo if “BPM” is set to MIDI) by the number specified in the
Times parameter.
To Next Page
Loading...
