62| Playing and singing
Exit from the loop
Do one of the following:
▪ Press the same Style Element button again, or
▪ Select a different Style Element.
Keep a Style Element looping while its button is pressed
▪ Keep an Intro, Break or Ending button pressed to loop it. Release it when you
want the Style Element to exit from the loop.
▪ If the Auto Fill function is turned on, keep a Variation button pressed to loop
the corresponding Fill. Release it when you want the Fill to exit from the loop,
and the Variation to start playing.
Fade In/Out
You can start and/or stop your playing with a smooth fade-in or fade-out.
Fade in
▪ While the accompaniment is not playing, press the FADE IN/OUT button to
light up its indicator and start the accompaniment with a smooth fade-in.
The accompaniment will start. When the maximum volume is reached, the
indicator will turn off.
Fade out
▪ When the song is approaching its end, press the FADE IN/OUT button to stop
the accompaniment with a smooth fade-out.
Setting the Fade time
▪ Go to Global > General Controls > Basic to set the Fade In and Fade Out time.
To Next Page
Loading...
