728| Effects for the Sounds, Voice, Guitar
c MIDI Sync Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
BPM MIDI,
40.00…300.00
MIDI syncs to the system tempo; 40–300 sets
the tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO
speed
Times x1…x32 Sets the number of notes that specify the LFO
speed
d Mod. Depth –100…+100 Sets the amount of resonance intensity con-
trol via LFO/D-mod
Trim 0…100 Sets the input level at the resonator
e Voice1: Pitch C0…B8 Sets the voice1 Pitch for resonance
Fine [cents] –50…+50 Fine-adjusts the voice 1 pitch for resonance
Level 0…100 Sets the Voice1 output level
f Voice1:
Resonance
–100…+100 Sets the intensity of resonance when Control
Mode = Manual
High Damp [%] 0…100 Sets the damping amount of resonant sound
in the high range
Pan L6…L1, C, R1…R6 Sets the Voice1 stereo image
g Voice2: Pitch C0…B8 Sets the voice 2 Pitch for resonance
Fine [cents] –50…+50 Fine-adjusts the voice 2 pitch for resonance
Level 0…100 Sets the Voice2 output level
h Voice2:
Resonance
–100…+100 Sets the intensity of resonance when Control
Mode = Manual
High Damp [%] 0…100 Sets the damping amount of resonant sound
in the high range
Pan L6…L1, C, R1…R6 Sets the Voice2 stereo image
i Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
a: Control Mode
f: Voice 1: Resonance
h: Voice 2: Resonance
This parameter determines the resonance intensity.