Korg PA1000

Effect parameters |74 3
e Depth –100…+100 Sets the LFO modulation depth for pitch
shift amount
Src Off…Tempo Selects the modulation source of the depth
of modulation
Amt –100…+100 Sets the modulation amount of the depth
of modulation
f Pan L, 1 : 99…99 : 1, R Sets the panning effect sound and dry
sound separately
g Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
a: Pitch Shift [cents]
e: Depth
These parameters set the amount of pitch shift and amount of modulation
by means of the LFO.
Pitch
Higher
Pitch Shift Mod - Pitch Shift / Depth
Lower
Original Pitch
Pitch Shift (+ value)
LFO Waveform=Triangle
Depth (+value)
LFO Waveform=Square
Depth (–value)
g: Pan
h: Wet/Dry
The Pan parameter pans the effect sound and dry sound to the left and right.
With L, the effect sound is panned left, and the dry sound is panned right.
With a Wet/Dry = Wet setting, the effect and dry sound will be output in a
proportion of 1:1.