Korg PA1000 User Manual

Effect parameters |753
Scratch
This effect is applied by recording the input signal and moving the modula-
tion source. It simulates the sound of scratches you can make using a turn-
table.
Input
D-mod
Envelope Select
D
-mod
Envelope Control
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Scratch
Direct
Mix
D
-mod
Rec Control
Scratch
a Scratch Source Off…Tempo Selects the modulation source for simulation
control
b Response 0…100 Sets the speed of the response to the Scratch
Src
c Envelope Select D-mod, Input Selects whether the start and end of record-
ing is controlled via the modulation source or
the input signal level
Src Off…Tempo Selects the modulation source that controls
recording when Envelope Select is set to
D-mod
d Threshold 0…100 Sets the recording start level when Envelope
Select is set to Input
e Response 0…100 Sets the speed of the response to the end of
recording
f Direct Mix Always On,
Always Off,
Cross Fade
Selects how a dry sound is mixed
g Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source

Korg PA1000 Specifications

General

Sound Engine	EDS-X (Enhanced Definition Synthesis-eXpanded)
Polyphony	128 voices
Keyboard	61 keys with velocity and aftertouch
Display	7-inch TFT display
Song Player	MP3, SMF (Standard MIDI File), KAR
Storage	960 MB
Connectivity	USB, MIDI, Audio In/Out
Weight	10.75 kg (23.7 lbs)
Effects	148 effect types
Sounds	Over 1, 750 Factory Sounds, 107 Drum Kits
User PCM Sample Memory	600 MB
Style Tracks	8 tracks
Chord Sequencer	Yes
Pads	4 Assignable Pads
Lyrics	MID, KAR, MP3+Lyrics
Sequencer	16 tracks
SongBook	Fully programmable music database
Multi Pad	4 Assignable Pads
Connections	Audio In, Line Out
Clock	Internal
Power Supply	AC adapter